86
Productivity advantages from vibratory storage feeders
SKAKO COMESSA says that vibratory storage feeders are the best
possible solution to make sure sorting and inspection machines
run as long as possible, with the right quantity of products, and
without needing an operator to check.
SKAKO COMESSA offers two possible solutions to feed inspection
and packing machines. The first solution is a silo feeder, which is
suitable for bulk material e.g. nuts, washers and very small/short
screws.
The system is set up by positioning a 900 x 900mm container,
which has a sliding gate in the bottom, on top of the silo feeder.
After opening the gate in the transport box the product flows into
the silo and can be feed into the next stage machine. It can be
started and stopped with a level detector, which is installed above
the vibration bowl of the inspection / packing machine.
The second solution for longer, bigger and interlocking products is
the FVE storage feeder, which is available in different sizes (70
litres/125kg content up to 2,240 litres/ 4,000kg).
To complete the feeding equipment in front of an
inspection/packing machine there is the TILDE, a lift and
tipping-system which can empty all sizes of transport boxes
(10 – 3,150kg per box) into the a.m. feeders.
High speed vision system
The image processing system “Auto Control” is the main part of the industrial PC with “Auto Control“ software for high speed.
inspection system OPTISORT. GEFRA says that this upgrade then allows for programming of a new
This complete image processing system consists of the following part to be done within less than 15 minutes. The image processing
components: seventeen inch monitor, keyboard and IPC including the system allows a maximum speed of 1,000ppm and is able to inspect
inspection software, camera and lightning. Also, because the system cracks and recess. Statistics, BDE and network is standard.
uses “plug & play” components, it is ready for use straight away. “Well-known national and international manufacturers in our
Programming and operating are simple and allow measurements of reference list make evidence of the reliability of this inspection system.
all inspection criterions of fasteners. All measurements and special tools The high reliability for users is guaranteed by the use of field proven
for inspecting fasteners like thread pitch, head cracks, diameter, length, components, which are designed to form a suitable inspection system
major and minor thread, angle and splined recess, are integrated in with a 0ppm quality for the individual. As a
the programming software “Auto Control”. matter of fact an optimum and perfectly
For older sorting machines, GEFRA offers rebuilding and working system is combined with a first class
upgrading services. The upgrades service.“
include replacing all electrical
components, controller and
motors. The vision system
includes top camera,
telecentric side camera,
touch screen and an
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102 |
Page 103 |
Page 104 |
Page 105 |
Page 106 |
Page 107 |
Page 108 |
Page 109 |
Page 110 |
Page 111 |
Page 112 |
Page 113 |
Page 114 |
Page 115 |
Page 116 |
Page 117 |
Page 118 |
Page 119 |
Page 120 |
Page 121 |
Page 122 |
Page 123 |
Page 124 |
Page 125 |
Page 126 |
Page 127 |
Page 128 |
Page 129 |
Page 130 |
Page 131 |
Page 132 |
Page 133 |
Page 134 |
Page 135 |
Page 136 |
Page 137 |
Page 138 |
Page 139 |
Page 140 |
Page 141 |
Page 142 |
Page 143 |
Page 144 |
Page 145