Kundan MARTYN PRICE
Stainless Steel Nuts from
Not many other fastener stockists can boast
Kundan
that they have M1 to M110 DIN 934 full nuts
Specialized in Stainless Steel Nuts &
on the shelf. West Midland’s fastener specialist
Bolts since 1978. ISO/TS 16949:2002
Martyn Price can.
certified company by DNV and
supplying fasteners to OEM’s
For over 35 years Martyn Price have built a
(Automobiles & Engineering).
solid reputation as a first tear supplier of nut
Received 6 times “Export Excellence Awards” and have been
products, these obviously include the standard
recognized as “Star Export House” by Government. Please visit our
sizes but they are arguably better known for
website www.kundan.com and e-mail us at
fasteners@kundan.com
their incredible range of non standard full and
locking nut parts. All of which are marketed
TYPE OF NUTS under their well known Allgrip brand. Based in
• Hex Nut – DIN 934 • Spring Nut Stourbridge they are well placed to offer any surface finish or secondary
• Hex Thin Nut – DIN 439 • Coupling Nut – DIN 6334 operation, with a rapid turnaround. These parts are available in grade 8,
• Hex Flange Nut with Serration – • Square Weld Nuts – DIN 928
10 and 12 along with both fine pitch and left hand thread.
DIN 6923 • Hex Weld Nuts – DIN 929
• Square Nut - DIN 557
Furthermore, Martyn Price Fasteners distribute arguably the largest
• Security Nut/Break Nut/Shear
Nut
range of washers in the UK; these are also available in both metric and
imperial. The foundation of this extensive range includes those hard to
SPECIALITY
source parts including double coil and load indicating washers.
• High Strength Stainless Steel Nuts equivalent to 8 & 10 class by cold
Martyn Price Ltd FASTENER PEOPLE who have the stock and knowledge
working without Heat Treatment – Technically superior.
to solve every requirement NO MATTER HOW UNUSUAL.
• Automobile Engine Nuts (High Temperature Application)
• No Plating – Eco Friendly & RoHS/WEEE compliance as per European Norms
• Long Corrosion Life
• Colours Available – Natural Bright, Silver, Antique & Black
* MATERIAL GRADE: STAINLESS STEEL 304/316/410.
Email:
fasteners@kundan.com www.kundan.com Tel: +44 (0) 1384 424767 Email:
sales@martynprice.co.uk
N D JIG & GAUGE NORD-LOCK
Square Plate Washers, Round
NORD-LOCK is committed to the
Washers Standard
manufacturing of a superior securing
& Non Standard system designed for bolted joints. Our
aim is to provide a secure and safe bolt
With over 60 years in the manufacture of
locking system that is not affected by
washers, N D JIG & GAUGE has the
any kind of vibration or dynamic loads.
knowledge and expertise to suit your
requirements.
The outside of the washers has radial
We hold extensive stocks of standard black
teeth, which grip and seat the mating surfaces when the Nord-Lock
washers, square plates, through hard Washer is tightened. In addition, the inside of the washer forms a
washers, taper washers and stainless steel wedge, making the pitch greater than the thread pitch of the bolt.
washers.
The washer is mechanically keyed in place and allows movement only
As manufacturers we have the capability for non-standard washers,
special nuts and pressings at our factory in Wednesbury and with this,
across the face of the cams. Any attempt by the nut/bolt to rotate loose
we can turnaround special square plates and round washer requirements
is blocked by the wedge effect of the cams. Any increase of tension
in days. We have extensive stocks of raw material whether it is mild
makes the nut/bolt self-locking. Using the wedge-locking principle,
steel, stainless steel, copper, brass or an exotic alloy specials are also nuts/bolts cannot come loose when exposed to vibration/dynamic
held in stock for call off.
loads. However, the wedge lock nut can be removed easily with the use
of a wrench. The washer can be re-used - always with full locking effect.
The standard washer ranges we stock are, BS 4320 form E, F & G. BS
3410 Table 7 & 8. BS 4395 thru hardened washers, square plates from
40mmsq x 3mm thick upto 150mm sq x 25mm thick. Specials made to
While most locking devices rely on friction, the Nord-Lock washer uses
order, self colour, zinc plated, hot dip galvanised and sheradized.
tension to lock the joint. Therefore, the locking function is not lost by
lubrication.
Phone your enquiries to our sales office direct, for immediate response
and for more information on our products and services please visit our
website.
Tel: +44 (0) 121 556 0824 www.ndjig.com Tel: +44 (0) 1980 847129 Email:
enquiries@nord-lock.co.uk
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102 |
Page 103 |
Page 104 |
Page 105 |
Page 106 |
Page 107 |
Page 108 |
Page 109 |
Page 110 |
Page 111 |
Page 112 |
Page 113 |
Page 114 |
Page 115 |
Page 116 |
Page 117 |
Page 118 |
Page 119 |
Page 120 |
Page 121 |
Page 122 |
Page 123 |
Page 124 |
Page 125 |
Page 126 |
Page 127 |
Page 128 |
Page 129 |
Page 130 |
Page 131 |
Page 132 |
Page 133 |
Page 134 |
Page 135 |
Page 136 |
Page 137 |
Page 138 |
Page 139 |
Page 140 |
Page 141 |
Page 142 |
Page 143 |
Page 144 |
Page 145