28
MMK-Metiz receives
Taiwanese
quality certificates
equipment
The Magnitogorsk Hardware and Sizing approximately 25,000 metric tons of
Plant MMK-Metiz, part of the engineering fasteners, an increase of 25%
installed in
Magnitogorsk Iron & Steel Works, has year-on-year.
received quality certificates for its The share of MMK-Metiz on the
Ukrainian plants
engineering and high-durability fasteners market is 52%. Since small
fasteners from the SCS, a leading producers account for 23% of the market,
third-party provider of certification, the plant's output enjoys considerable by Elena Semak, editor,
auditing and testing services and demand. Its quality certificates are an
Metiz Magazine
standards. additional advantage for MMK-Metiz and
In the first seven months of 2008, the evidence of its readiness to continue
Three Taiwan-made straight line continuous
plant delivered to its customers working to increase its market superiority.
wire drawing machines have been put into
operation at "Stalkanat", in Odessa. Similar
Unique “Fastening”
machinery is also due to be installed in the
scientific and research enterprise, Ad'yustazh
Ltd, in Donetsk.
expo in the Urals
In August 2008 the technicians of Taiwan
company Cheng I Machinery, with the participation
of its Ukrainian partner Slisaruk, PE, completed
The third specialised “Fastening” show took commissioning and test running of new wire
place 16-18 September in Yekaterinburg,
drawing equipment, which is installed at the
capital of the Ural Federal District of Russia, as
hardware plant of OJSC Stalkanat in Odessa,
part of an exhibition program covering all
Ukraine.
facets of metal working.
One 9-block and two 7-block straight line
The Fastening show comprised sixty exhibiting
continuous wire drawing machines made by Cheng
companies, mainly Russian domestic suppliers,
with the aim, says organiser Ural 2000 Exhibitions,
I Machinery are now in operation. Each machine is
of presenting and promoting modern technologies,
equipped with a mechanical descaling line, a
equipment, materials and tools for achieving
non-stop coiler for forming of Rozetta-type coils, a
fastening joints. Characteristic of many Russian
horizontal spooler, as well as electric butt welding
exhibitions the event also sought to share and and wire pointing devices.
spread experience and know-how lining enterprises Tests were made with usage of common quality
in the machine building and other industries with
low carbon wire and welding wire but all three
research and development institutes and project
wire drawing machines are also capable of drawing
organisations in the Urals Federal district.
high carbon wire as well. At present preparatory
The event, says Natalia Makarova, also attracted
works for commissioning another 7-Block
partners from other Russian regions and the
Continuous Cheng I Machine are underway to work
Commonwealth of Independent States. “The
specialised exhibition Fastening is the only event
with a Stalkanat welding wire coppering line.
that covers this topic in the Urals,” she says. “Every
Ad'yustazh factory in Donetsk has also purchased
year we have our exposition focused on the broad
Taiwan-made wire drawing machinery from Cheng
spectrum of prospective customers, including
I, which as this report is written is in transit from
representatives of production enterprises, sectoral Taiwan to Ukraine. As Metiz Magazine was
science, business and authorities, and also informed by Ad'yustazh factory, the new wire
wholesale customers and end consumers of
drawing machine was scheduled for commissioning
fastening tools.”
by technicians from Cheng I Machinery and its
“The academic and research part of the
Ukrainian partner Slisaruk, PE, during October 2008.
exhibition gives a wonderful
Putting the new equipment into operation will
opportunity to learn more
permit the factory to expand its production
about the latest market trends
and scientific researches and
capacities and extend manufacturing in small
for individual organisations to
diameter wire ranges. The new equipment will
present their own reports and
specialise in drawing low carbon wire with
to discuss sectorial problems
diameters from 0.8 to 1.4mm.
and to share your experience
Today's Ad'yustazh plant production base
with colleagues.” consists of Sket-made machines which are outdated
The next edition of
and rundown. The new machine is high speed and
Fastening will take place
is expected to optimise the production process.
15-17 September 2009.
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102 |
Page 103 |
Page 104 |
Page 105 |
Page 106 |
Page 107 |
Page 108 |
Page 109 |
Page 110 |
Page 111 |
Page 112 |
Page 113 |
Page 114 |
Page 115 |
Page 116 |
Page 117 |
Page 118 |
Page 119 |
Page 120 |
Page 121 |
Page 122 |
Page 123 |
Page 124 |
Page 125 |
Page 126 |
Page 127 |
Page 128 |
Page 129 |
Page 130 |
Page 131 |
Page 132 |
Page 133 |
Page 134 |
Page 135 |
Page 136 |
Page 137 |
Page 138 |
Page 139 |
Page 140 |
Page 141 |
Page 142 |
Page 143 |
Page 144 |
Page 145