Titrimetric Analysis
The Titrets
®
Method
Titrets ampoules use reverse titration to quantify concentrations. After
snapping the ampoule tip, the sample is drawn into the ampoule in
small doses (with the Titrettor™ device included in each kit that precisely
controls the sample) (Step 1), until a color change signals that
the equivalence point has been reached (Step
2). The titration is stopped at the end point
and the ampoule is held upright. The liquid
level will correspond to a printed scale on the
ampoule’s outer surface (Step 3).
Kits include 30 ampoules with valve assem-
blies, a titrettor, accessory solution(s) (when
necessary), a sample cup, and instructions.
Material Safety Data Sheets are provided in
test kits.
Each Titret
™
ampoule is 13 mm in diameter and is
designed for titrimetric analysis. The ampoule contains
vacuum-sealed liquid titrant and has a flexible valve
assembly attached.
The Titrets Test Procedure
STEP STEP STEP
1 2 3
9
Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64  |  Page 65  |  Page 66  |  Page 67  |  Page 68  |  Page 69  |  Page 70  |  Page 71  |  Page 72  |  Page 73  |  Page 74  |  Page 75  |  Page 76  |  Page 77  |  Page 78  |  Page 79  |  Page 80  |  Page 81  |  Page 82  |  Page 83  |  Page 84  |  Page 85  |  Page 86  |  Page 87  |  Page 88