This page contains a Flash digital edition of a book.
Plansee v1 21/12/09 13:42 Page 10
VENDORVIEW
Monolithic rotary
sputtering targets
Innovative product concept for higher sputtering
productivity
Optimized sputtering processes from bigger production runs. The
significantly contribute to the efficient manufacturing of monolithic targets is
production of solar cells. Maximum carried out without any bonding. This lean
material utilization, faster processes and process implies a fast production and
top quality are key success factors for this maximum cost efficiency for customers.
Issue VI 2009
industry. With its molybdenum monolithic
rotary sputtering targets, PLANSEE fulfills Best materials for maximum
these requirements and sets new solar cell efficiency
standards for efficient coating. The targets In cooperation with all major solar cell
will be presented in September at the manufacturers, PLANSEE has developed
Photovoltaic Solar Energy Conference in new materials that improve the Where other targets run
Hamburg/Germany. performance of the thin film absorber
on empty, PLANSEE
-pv-management.com layers. By alloying and developing
products still perform.
As the leading supplier of planar and material compounds, PLANSEE adapts
.solar
rotary sputtering targets for thin-film solar inherent material properties to meet the
www
cells and flat panel displays, PLANSEE is specific requirements of the customers
No matter if rotary or planar, in
continually developing innovative and tune the chemical composition of thin
bonded or monolithic version,
10
solutions for optimal sputtering results film absorbers. For the solar industry, the
our sputtering targets offer:
and an efficient coating process. For the company offers materials such as Mo, Cr,
photovoltaic industry the company now MoNa, CuGa, CuIn or CuInGa.
- Best target utilization through
offers monolithic rotary targets made of
optimized geometries
100 % molybdenum. Their design without With its complete in-house manufacturing,
a backing tube pays off: hundreds of tests extensive expertise in powder metallurgy
- Full density and high purity
have already proven the benefits in and special deformation technologies, - Homogenous microstructure
practice. PLANSEE guarantees the best quality
materials for the coating industry. They
Fast process. High power. stand out for their full density, high purity
Maximum yield. and a uniform and fine grained
Without a low-melting bonding layer, microstructure. The company will present
monolithic targets allow the highest heat its latest developments for the solar
Anaheim / California
transfer rates. Monolithic rotary targets industry at the 24th European
October 27-29 2009
can be run with up to 30 kW/ m power. Photovoltaic Solar Energy Conference &
Booth # 771
The advantage: greater productivity and Exhibition in Hamburg (Sept. 21-25 2009).
improved efficiency for a faster coating
process. As the leading manufacturer of refractory
metals and composite products PLANSEE
In general, rotary targets have double or sets standards in many industries. The
even triple the material utilization of planar organization has established facilities at
targets. The rotary monolithic versions 34 locations in 16 countries.
hold the record: they maintain their
stability even after target utilization of For more information about PLANSEE
more than 75 %. Producers thereby profit please visit www.plansee.com
PLANSEE Metall GmbH, 6600 Reutte, Austria
Tel. +43 5672 600-0, coating@plansee.com
www.plansee.com
Pic A: Monolithic rotary target before Pic B: Monolithic rotary target after
the sputtering the sputtering
Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44
Produced with Yudu - www.yudu.com