E Q U I P M E N T PE T E RPU G G E R
VACUUMPOWERWEDGERS
Peter Pugger’s patented vacuum deairing technology evacuates the complete
processing chamber during the mixing cycle. You are guaranteed deaired clay!
Peter Pugger’s patented chamber design allows you to separate clay processing
from the gear drive preventing excess clay from oozing into bearings and seals.
Its compact and light weight design and convenient controller location allow
the operator full control of the pugmill at all times.
Peter Pugger is able to deair the clay while it is being mixed, reducing cycling
times. In addition, Peter Pugger’s new Intellectual Mixing Technology (IMT)
enables the pugmill to operate at mixing and pugging speeds several times
faster than other pugmills by providing real-time monitoring of the clay consis-
tency accelerating up to twice the speed as previously offered.
ModelVPM-9 VPM-20VPM-30VPM-60
Batch Capacity25 lbs 45 lbs 80 lbs 140 lbs
Pugging Rate500 lbs. per hour 600 lbs. per hour 800 lbs. per hour 1500 lbs. per hour
Mixing Rate150 lbs. per hour 180 lbs. per hour 240 lbs. per hour 500 lbs. per hour
Weight:130 lbs 230 lbs 410 lbs 500 lbs
Dimensions:36”Lx 14” W x 14” H 42”Lx 13” W x 20” H 46” Lx 20” W x 33” H 58” Lx 31” 24”W x 31" H
Pug Size 3” Round 3” Round 3” Round 3.5” Round
Hopper Door Size5 1/4” x 5 1/4” 7” x 7” 8” x 8” 9” x 9”
Motor 3/4 HP1-Phase,1 HP1-Phase,1.5hp 1-phase,2 HP1-phase,
8 amps at 120 volts10.3 amps at 120 volts16 amps at 120 volts12 amps at 220 volts
or 6 amps at 220 voltsor 8 amps at 240 volts(3 phase & 50 hz available)
Vacuum Pump1/16hp, 3 amps at 120 volts1/3hp, 4 amps at 120 volts 1/3hp, 4 amps at 120 volts1/3hp, 2.2 amps at 220 volts
Optional Equipment Adjustable StandVariable SpeedVariable Speed
TILEPOWERWEDGERS
TILEPRODUCTIONPUGMILLS
Vacuum Deairing
ModelTM1700TM2700
Power Wedgers With
Pug Diameter 5" 7"
Tile Extrusion Capability
Max. Output2,204 lbs/hr. 5,511 lbs/hr.
Weight 1,708 lbs. 3,791 lbs.
VPM-30TE
Dimensions 105"Lx 29"W x 77"H122"Lx37"W x 98"H
VPM-60TE
Max Extr. Cap. 13 3/8" wide13 3/8" wide
EXTRUSIONDIES
Mount directly to the end of your vacuum deairing pugger-
mixer. Choose from handle 1 or 2, coil, rectangle, large
TM2700
slot or blank. Includes mounting hardware. Please specify
model and die when ordering. $48.00 eachHANDLE1HANDLE2COILRECTANGLESLOT
23
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76