76
Bolt Fasteners Co.
F6
Bolt Fasteners Co. was founded in 1986 and its production processes include phosphating, drawing, forging /threading and heat treatment.
It has a production line of 2-3-4-5 and 6 station formers and with new technology it has the capability to make products in sizes 3mm -
18mm x 8mm -150mm.
“Our machines allow us to have quick and flexible production planning in a very wide product range which can be summarised under 3
main groups:”
• Customised parts, according to their drawings.
• Cold forging parts
• Bolts, screws, stud bolts and rivets according to DIN – ISO A.N.S.I.
BTS GmbH
E13
BTS GmbH is a specialist manufacturer and distributor of fixings and fasteners based on DIN EN ISO 9001:2004 and ISO 14001:2004.
It produces a wide range of products including Beamclamps (FM,VDS,UL), wing nuts, wing screws, thumb screws, channel nuts, wedge
nuts, dome nuts, wood connectors, hooks and eyes, in a variety of materials such as malleable iron, steel, stainless steel and brass.
Burwood Fastener Products Ltd
B2
Burwood Fastener Products Limited is a specialist supplier of fasteners, hardware and other consumable products to the aerospace,
automotive and commercial industries.
Burwood has over 30 years of experience within these fields and can provide a variety of solutions to customers purchasing and supply
chain requirements, whether these are ad-hoc purchases, contracted prices as part of a Service Level Agreement, Direct Line Feed (DLF)
systems, 2 bag systems or consigned stock managed by its staff.
“Our extensive range of stock, held at our facility in Surrey, UK, will be provided with full trace documentation and certified in accordance
with the requirements of our EN/ AS 9120:2003 AND ISO 9001:2000 certifications. We can provide products manufactured to DIN, EN, ANSI,
SP, AS, SL, CR, MS, A, AN, AGS, HL, NAS and LN Standards as well as being able to manage the process of manufacturing parts to drawing.”
C-Tec South East
J12
C-Tec South East will be conducting live demonstrations of its unique products at Fastener Fair Coventry.
The demonstrations will include the CT1, also known as the Snag List Eliminator, which contains no solvents, is UV resistant, anti bacterial
and environmentally friendly. The CT1 can be used for indoor and outdoor work and will work on wet surfaces. It can also be used to bond
stones (with staining), tiles, metals, mirrors, wood and ceramics, as well as being able to replace mastics, wood, and PU adhesives, sanitary
sealants and butyl rubber sealants.
Another product which will be demonstrated on the stand will be the Power Grab N Bond. C-Tec says that this construction adhesive is
ideal for quick heavy duty bonding and can be used for facades, granite, stone, tiles, and mirrors etc. It contains no solvents, can be used on
wet surfaces and is paintable.
Caparo Atlas Fastenings
C11
Established in 1887, Caparo Atlas Fastenings (CAF) is a UK manufacture of fastenings. Focusing on customer specials and licensed product it
supports various markets that include automotive, off highway, defence, rail, distribution and marine.
From its manufacturing base at Darlaston (15 minutes north of Birmingham), it produces male fasteners from M3 to M33, wheel nuts and
female parts up to M30 and studs from M6 to M24. Strength grades range up to 12.9 in carbon steel and parts in stainless steel (including
high temperature), brass and aluminium are also available.
Caparo also has two operations in Spain and India. Caparo Atlas Espana, in Barcelona, specialises in the manufacture of grooved, cylindrical
and spring pins as well as customer specific engineered parts in carbon, stainless steel, brass and aluminium. Whilst the recently opened
46,000 square metre fastenings plant in Chopanki, India, produces a variety of standard and special fasteners.
Crescent Manufacturing
F8
Crescent Manufacturing has recently purchased two 3/8 Waterbury Headers, increasing the range of products it can produce.
The new headers enable it to manufacture parts in sizes M3.5 to M8, with lengths up to 3inches (76mm) underhead for all threaded
parts or 4 inches (102mm) for any unthreaded parts.
“This new equipment means that we are now able to offer a more extensive line on such military parts as the AN525, MS27039,
MS24694, NAS517 and the NAS623, which we were previously very limited on.”
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102 |
Page 103 |
Page 104 |
Page 105 |
Page 106 |
Page 107 |
Page 108 |
Page 109 |
Page 110 |
Page 111 |
Page 112 |
Page 113 |
Page 114 |
Page 115 |
Page 116 |
Page 117 |
Page 118 |
Page 119 |
Page 120 |
Page 121 |
Page 122 |
Page 123 |
Page 124 |
Page 125 |
Page 126 |
Page 127 |
Page 128 |
Page 129 |
Page 130 |
Page 131 |
Page 132 |
Page 133 |
Page 134 |
Page 135 |
Page 136 |
Page 137 |
Page 138 |
Page 139 |
Page 140 |
Page 141 |
Page 142 |
Page 143 |
Page 144 |
Page 145 |
Page 146 |
Page 147 |
Page 148 |
Page 149 |
Page 150 |
Page 151 |
Page 152 |
Page 153 |
Page 154