stopped by the clip; allow the rod to absorb the casting in too. This should put your bait directly
force of the lead. Let the rod be pulled down in a under the spod. Please bare in mind this is fairly
controlled manner and as the line tightens up, lift rough, but it works for me!
the rod back in to the 90° position and let the lead
fall on the tight line. You will feel it hit the bottom. Getting Tight
If you need to make any minor adjustments If you are fishing up against snags or overhanging
just wind on or take off any line until the required trees, the best option is to keep under casting
distance is found. A couple of casts will soon until you reach the spot then repeating the
show you how much to tweak the distance! clipping up procedure. What you need to
remember when fishing up against over hanging
Walk Out trees is
During the winter last year a couple of that the
the other lads at Korda and I were
fishing a fairly featureless lake in Essex.
Damian
way you
cast has
The trick that we employed was to walk
out our fishing lines on the lawn at work
Clarke’s
to be
along with the spod, so that we could
arrive and cast out after dark to the
centre of the lake without any worries. guide to
When I do this I adjust the fishing line
distances, approx one foot of line longer
for every three feet of water that I am
Clipping Up:
consistent. It is better to have a
flatter cast so that the lead doesn’t go to
high. It is much more likely to go under the
trees.
If you need to get the bait right under the
overhang, what I do is clip up as close to
the branches as I can and then use a
‘flattish’ cast. As the lead hits the water,
allow the rod to absorb the cast, but let the
lead go under the overhang on a tight line
by letting the rod tip move forward as far
as you want the lead to go under. This
should get you right on the money. If the
If you know someone handy in the
casts not going right, lift the rod back in to
the 90° position and it’ll clip the outer
workshop replace the weak
branches anyway as normal.
factory fits with custom jobs...
Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64