PROJECT MAKING ACCESSORIES 49
“My advanced technology education class turned 60 pens for the Freedom
Mini Lathe Toolrests
Pen Project to send to our service men and women to show our
appreciation for their service to our country.”
Solid tool rest will provide the ultimate
Robert Tienor, Kirby Middle School, San Antonio, TX
chisel control
L57840 Solid Bar Toolrests
L57840
The smooth steel surface allows the tool to glide over the bar
Drill Press Lathe
and the dense steel alloy allows vibration free turning.
For turning small 2 pc set for Mini lathes with 1/2" toolrest posts (Carba-
spindles or any of our
Tec). Includes 6" and 9" long toolrests with a 1/2" top bar.
small lathe projects
CLTSET12 2 pc 1/2" post ........................................
$
19.95 set
The attachment includes a ball
3 pc set for Mini lathes with 5/8" toolrest posts (Jet,
bearing tailstock center, a
Delta, Turncrafter Pro). Includes 6", 9" and 12" long toolrests
L57841 with a 5/8" top bar.
sturdy vertical 12" toolrest, a
CLTSET58 3 pc 5/8" post ......................................
$
29.95 set
spur center and a screw chuck.
Add our PKM-DL mandrel and
L57841 Solid Bar “S” Toolrests
CLTS2 “S” toolrest 1/2" post & top ........................
$
14.95
you are ready to make pens,
L57842
CLTSJ “S” toolrest 5/8" post & top ........................
$
19.95
pencils etc. on your Drill Press!
L57842 Solid Bar 3" Radius Toolrests
DPLATHE Lathe Attachment ....................................................
$
21.95
Off center design give a longer reach for inside or outside
L57843 surfaces of the bowl.
4 Piece Drive Center CLTC12 Curved 1/2" post & top ................................
$
14.95
Set for #1 MT and
CLTC58 Curved 5/8" post & top ................................
$
14.95
#2 MT Lathes
L57843 “V” Toolrest For turning tiny cups and bowls. Use with
Jet, Delta, Turncrafter models TCLPRO & TCLPROVS
Includes hard to find
CVTJ Toolrest/Jet/Delta (5/8"post) ........................
$
29.95
replacement centers
L57844
L57844 Heavy Duty French Curl Toolrest (5/8" post)
For lathes equipped with #1MT
You can shape bowls up to 10" dia. outside and hollow bowls
or #2MT headstock and tailstock
as small as 6" in dia. inside. Overall size: 4" high, 8-1/2" wide &
centers. Packaged in convenient wood box. made from heavy duty cast iron. Compatible with midi lathes with
Includes: 5/8"dia. headstock spur center for narrow spindles • 1"dia. 5/8" posts such as the Turncrafter Pro, Delta, or Jet.
headstock spur center for standard spindles • Live ball bearing tailstock
CLTSJ2 French Curl Toolrest ....................................
$
14.95
center with cup and point • Hollow center for drilling 5/16" (#2MT) through
holes (for lamps, etc) and 3/16" (#1 MT).
LCENT4 MT #2 4-pc Drive Center Set ........................................
$
39.95
Super Powerful Rare-Earth Magnets
LCENT41 MT #1 4-pc Drive Center Set ........................................
$
39.95 Lifting capacity is
LCENTLT1X MT #1 Live Center ..........................................................
$
19.95 2-1/2 lbs for the
LCENTLT2X MT #2 Live Center ..........................................................
$
19.95 1/4" magnet up to
30 lbs for the 1"
Face Plates
magnet.
CF6 6" face plate (1" x 8tpi) ..........
$
29.95
You’ll find a multitude of
CF4J 4" face plate (1" x 8tpi) ..........
$
17.95
uses for these powerful SIZE QTY/PACK PRICE
CF4 4" face plate (3/4" x 16tpi) ....
$
17.95
“Rare-Earth Magnets.” EMAG14 ....1/4" dia x 1/10"....20 ......
$
9.95/pack
L57812 CF3J 3" face plate (1" x 8tpi) ..........
$
16.50
Make jigs, fixtures, EMAG38 ....3/8" dia x 1/10"....10 ......
$
4.95/pack
CF3 3" face plate (3/4" x 16tpi) ....
$
16.50
clamps, tool holders or EMAG12 ....1/2" dia x 1/8"......10 ......
$
9.95/pack
L57813 CF2J 2" face plate (1" x 8tpi) ..........
$
11.95
CF2 2" face plate (3/4" x 16tpi) ....
$
11.95
the best fridge magnet EMAG34 ....3/4" dia x 1/8"......10 ....
$
19.95/pack
L57812L57813
in the world. EMAG10 ........1" dia x 1/8" ......5......
$
19.95/pack
Double-faced Mounting Tape
Mount blanks to face plates
4'' Mighty-Micro Table Saw
Strong bond. 3/4" width x 108 ft mounting tape
Cut small precise parts with the
CMTAPE Mounting Tape ............................
$
13.95
Mighty-Micro™ table saw.
Quick, easy and safe to use – this micro saw is
Mini Brass Barrel Hinges perfect for hobbyists and model makers.
Ideal for small boxes SPECIFICATIONS:
Simply drill a 5mm hole to accept the hinge. The
• Max. Depth of cut: 3/4"
installed hinge operates smoothly. Sold in packs of 10.
• Includes 2 each - 4" dia.,
BHINGE Hinges......................1-9 Packs
$
5.10 pk
24 tooth Carbide blades
10+ Packs
$
4.60 pk • Motor: 1/8HP, 110V, 4500 RPM, 1/2" arbor
• Table 7-1/2" x 5-1/2", 1/16" Kerf Cast aluminum table and cast iron base
PSI Multi Function Guide • Miter gauge and safety guard included
This guide is an adjustable square, MTS3 Mighty-Micro Table Saw .................................. UPS $8,
$
59.95
level, ruler, and a center marker. REPLACEMENT BLADES 4" Carbide tooth blades, 1/2" arbor
Overall length is 12".
MTSBL24T 24 Tooth Carbide Replacement Blade ..........................
$
9.95
LCFIND ......................................................................................ONLY
$
9.95
MTSBL40T 40 Tooth Carbide Replacement Blade ..........................
$
9.95
FOR ASSISTANCE Call Toll Free: 1-800-847-8984 E-Mail:
pam@pennstateind.com or
www.psischools.com
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64