This page contains a Flash digital edition of a book.
HUGE SHOW ROOM with
COMPLETE EOE LINES READY
VAST SELECTIONS TO CHOOSE FROM
IMMEDIATE DELIVERY
INCLUDE; 1) CONTINENTAL CAN COMPANY CONTROLS AND MANUALS ARE INCLUDED.
MODEL 361-ST2 DUPLEX SLITTER WITH
COMPLETE 3PC CAN LINE FOR (401X411),
L
ITTELL MODEL LM1E COIL CUTTING
LINE MFG 1985 SERIAL NUMBER 87843-
DEXTER SHEET FEEDER. 2) FAEL BODYMAKER
300 CPM CONTINENTAL ST-4 DUPLEX
85 WITH DIGITAL CUT TO LENGTH AND 4 BOX
MODEL MST12-360, UNIT IS TOOLED
SLITTER WITH DEXTER SHEET FEEDER,
CLASSIFIER INCLUDING THE FOLLOWING:
FOR DIAMETER OF 161.4 MILLIMETERS
CINCINNATI MILLACRON BODY BLANK
1) COMMON FRAME MOUNTED COIL
3) SABATIER EXPANDER, ‘F’ STYLE ONE
FEEDER, SOUDRONIC ABM 420-SW WELDER,
UPENDER/COIL CAR/UNCOILER, UNIT
GALLON CANS 4) FLYNN 9 METER CURING
FLYNN MODEL AB9-FBB 9M CURING OVEN,
CONFIGURED TO ALLOW STAGING OF TWO
OVEN, SIX HEAT ZONES. 5) ACCELERATING
BLISS MODEL 1315 8 HEAD FLANGER,
COILS AND HAVE UNCOILER LOADED WITH
CONVEYOR 10 FEET LONG, 6)MAGNETIC
CARNATION MODEL 202 AND 021 BEADERS,
ONE COIL CAPACITY 25000LBS, 2) LIGHT
OVER-THE-HUMP ELEVATOR, 7) BLISS
ANGELUS 60L SEAMER WITH FLEETWOOD
BOX OPERATOR INSPECTION STATION,
MODEL 1420 DIE FLANGER, 8)ONE LOT OF
ROTOFEED, BORDEN 36 POCKET TESTER
3) LITTELL LEVELER WITH INTEGRATED
HONE CHAIN CONVEYING, APPROXIMATELY
MODEL AP-36-600-3 UPGRADED WITH
PRATT & WHITNEY ROLLING MICROMETER,
50 FEET LONG 9) ANGELUS MODEL 94P-6
HYDEPARK MD-20 LEAK TESTER, TWO SEMI
4) LITTELL SHEAR INCLUDES INTEGRATED
DOUBLE SEAMER S FOR ‘F’ STYLE BOTTOMS
AUTOMATIC MANUAL WATER TESTERS IN LINE
SEMS UV PINHOLE DETECTOR DIGITAL CUT
AND TOPS, 11) THREADER FOR TOPS, 12)
AND FLEETWOOD MAGNETIC ELEVATORS
TO LENGTH WITH THREE POST SHEAR, 5)
OVEN, PRE-HEATS THE CAN AND APPLIES
AND CAN CONVEYORS.
LITTELL FOUR BOX CLASSIFIER UNIT HAS
SOLDER AROUND THE SCREW TOP, 13) BOTH A & B PRIME PLATE STACKING BOXES
ALUMINUM FP EASY OPEN END LINE ALL ELECTRICAL CONTROLS, SET ON CONVEYORS, OPERATING MANUALS ARE
MAGNETIC OVER-THE-HUMP ELEVATOR, 14) AND TWO REJECT STACKING BOXES,
FOR 65MM 460/3/60. INCLUDED TOGETHER WITH 18 SPARE
BORDEN MODEL 500 24 POCKET AIR TESTER, ONE FOR PINHOLE AND ONE FOR OVER/
BLISS MODEL 1831 DOUBLE DIE COIL FED COMPLETE 300 DIAMETER SOT STEEL
APPLICATION ROLLS AND 21 SPARE ANILOX 15) FUSION INC. HANDLE APPLICATOR CAN, UNDER GAGE, 6) DIGITAL CUT TO LENGTH
PRESS WITH FRAME MOUNTED, DUAL WHEEL END MAKING LINE, STILL INSTALLED.
METERING ROLLS. ELECTRIC IS 460/3/60. 16) VIDEO JET MODEL EXCEL, 17) OVEN, SYSTEM IS ORMEC, CONTROLS ARE PLC
270 DEGREE CURLER WITH COIL FEEDER, LINE RATED SPEED IS APPROXIMATELY
PRE-HEATS THE CAN AND APPLIES SOLDER ALSO INCLUDED IS MOTORIZED DIE LIFT
FLEETWOOD MANUAL BALANCING STATION, 15,000 ENDS PER HOUR, TO INCLUDE
AROUND THE HANDLE,18) MAGNETIC OVER- TABLE AND PNEUMATIC GAUGING TABLE,
2 EACH MINSTER MODEL P2-45, SINGLE THE FOLLOWING ITEMS;
THE-HUMP ELEVATOR. ROCKWELL HARDNESS TESTER LINE IS
LANE, CONVERSION PRESSES WITH ROTARY
CAMERON MODEL 314 STRIP FEED DOUBLE
PRESSCO INTELLISPEC FULLY
VERY GOOD CONDITION.
INDEXERS AND DRT TOOLING INCLUSIVE
DIE SHELL PRESS WITH TWO 270 DEGREE
AUTOMATIC CAN INSPECTION SYSTEM. COMPLETE 2 COLOR TANDEM PRINTING
OF TAB DIES, 2 EACH LITTELL AUTOMATIC
FRAME MOUNTED ROTARY CURLERS.
LAST USED AS ONLINE INSPECTION OF THE LINE WITH TRAILING VARNISH UNIT,
TAB STOCK UNCOILERS, 2 EACH BORDEN 18
CROWN MODEL 5CD-26 ROTARY COMPOUND
INSIDE OF FOOD CANS FOR TRIM HAIRS AND LINE IS CONFIGURED TO RUN BETWEEN
POCKET FULLY AUTOMATIC END TESTERS,
LINER S/N N/A SETUP FOR SOLVENT
TRIM RINGS AFTER FLANGING. FEATURES 65-75 SHEETS PER MINUTE, WITH
FLEETWOOD DUAL LANE SEMI AUTOMATIC
BASE COMPOUND FLEETWOOD MANUAL
INCLUDE CAMERA, FOUR SEGMENT 36x45IN PRINTERS INCLUDES A EPIC
BAGGING STATION. ALL ASSOCIATED
BALANCING STATION MINSTER MODEL P245
LIGHT TREE WITH AUDIBLE ALARM, HIGH DAMPENING SYSTER AND GRAPHICS
CONVEYING, QUALITY CONTROL EQUIPMENT
CONVERSION PRESS WITH INTEGRATED
SPEED MODEM WITH PC ANYWHERE MICROSYSTEM INC. COMPUTERIZED
AND ELECTRICAL CONTROLS WITH ALLEN
TAB DIE S/N P2-45-19534 RATED 80 TO 400
SOFTWARE, HIGH SPEED ETHERNET CARD INK CONTROL SYSTEM. 2 LINES
BRADLEY PLCS, LINE IS STILL INSTALLED.
STROKES PER MINUTE. 45 TONS LENGTH OF
AND SOFTWARE AND A STAND ALONE AVAILABLE, LINE INCLUDES: 1) DEXTER
STROKE IS 2.5 INCHES, SLIDE ADJUSTMENT
PROGRAMMABLE PROCESSING MODULE FOR 9,000LB CAPACITY SHEET FEEDER, 2)
IS 1 INCH, SHUT HEIGHT ON BED STROKE
INPUTTING INSPECTION PARAMETERS AND 2 UNITS HOE 36x45 In. PRINTING
DOWN ADJUSTMENT IS 15 INCHES. LITTELL
CONTROLS FOR AUTOMATICALLY REJECTING PRESS MAXIMUM PRINT WIDTH OF 42
TAB STOCK UNCOILER
BAD CANS. ELECTRIC IS 460/3/60. GOOD INCHES, 3) WAGNER 12x44 IN COATER,
COMPLETE BROWN BOGGS TWO PIECE
CONDITION 4) WAGNER THERMAL SHEET CURING
STEEL DRAWN CAN LINES EACH ARE
COMPLETE 3 PIECE CAN LINE SET UP
OVEN, APPROX. 90 FT. LONG WITH 2
RATED FOR 100 TO 150 CANS PER
FOR 8 OUNCE CANS, 211 X 308 WITH A
HEAT AND ONE COOL ZONE. CAPACITY,
MINUTE. FIVE IDENTICAL LINES
P
AINT CAN LINE SET FOR 610X711 AND
610X709 HEIGHT CURRENTLY RUNNING
LINE SPEED OF 600 CPM. VERY NICE.
5) DEXTER 9,000 LBS. SHEET STACKER,
AVAILABLE. 2 OF THESE LINES LAST
711, EAR CLINCHING LINE FOR TO INCLUDE:
BLISS 5225 FULLY AUTOMATIC DUPLEX
6) WAGNER BUNDLE INLINE BUNDLE
RAN 307 X 111 TUNA CANS; 3 LAST RAN
1) CONTINENTAL CAN COMPANY MODEL
SLITTER WITH DEXTER SHEET FEEDER, ABB
TURNER.
301 X 106 TUNA CANS. INCLUDES 60T
361-ST3 DUPLEX SLITTER WITH DEXTER
ROBOT AUTOMATIC BODY BLANK FEEDER,
SOUDRONIC FBB5600 U
BROWN AND BOGGS AND CANCO TRIP PRESS
SHEET FEEDER, 2) BART II AUTOMATIC BODY
SOUDRONIC FBB5501U UPGRADED
WITH CAN CONVEYING. ALSO AVAILABLE
BLANK ROBOT, 3) HOPKIN EAR CLINCHER,
WITH DISCON AND UNISOUD, PIONEER
SOUDRONIC FBB5501 211
IS CORRESPONDING PRODUCTION CANCO
155 SHEET PER MINUTE CAPACITY, 4)
WATER CHILLER, IHLY MOD 600 4 HEAD
SOUDRONIC ABM 270R SW on 202, 211
SCROLL SHEAR LINES, COMPLETE WITH
FAEL BODY MAKER MODEL HSP22-360EC,
SPIN FLANGER, METALBOX MB-80 BEADER,
and 307
COMPLETE 207.5 DIAMETER SOT STEEL FEEDERS AND OXY DRY SHEET WAXER.
KATO FREQUENCY CONVERTER, LIQUID
ANGELUS 61H SEAMER WITH DRIVEN SOUDRONIC SBW 270 & 4400 DISCON
END MAKING LINE, STILL INSTALLED.
INSIDE SPRAY, OVERHEAD MAGNETIC
COMPLETE WAGNER SPOT COATING LINE
LIFTER PADS WITH 41 POCKET FLEETWOOD
FAEL SSW21-600 Set for 300 with CP for
LINE RATED SPEED IS APPROXIMATELY
DISCHARGE CONVEYOR HAS ANC MODEL
WITH ANILOX METERING SYSTEM AND
ROTOFEED AND MEF, BORDEN 36 POCKET
307 and 401
38,000 ENDS PER HOUR, TO INCLUDE
A270 WELD MONITOR, 5) MAGNETIC
ELECTROSTATIC WAXER, INCLUDES:
TESTER UPGRADED WITH HYDE PARK
SPRAY CONVEYOR, 12 FEET LONG AND
THE FOLLOWING ITEMS; DEXTER SHEET FEEDER, WAGNER 12 INCH
MD-20 LEAK TESTER AND AB CONTROLS,
BLISS 1103 SCROLL SHEAR LINES
MAGNETIC ACCELERATING CONVEYOR,
2 MANUAL WATER TESTERS, GOLDCO BLISS 1831 PRESSES.
CAMERON MODEL 314 STRIP FEED DOUBLE
DIAMETER BY 44 INCH WIDE SPOT COATER,
6) FLYNN 9 METER CURING OVEN, SIX
EMPTY CAN DOUBLE HI PALLETIZER,
DEWEY AND ALMY/GRACE MODEL 800
DIE SHELL PRESS WITH TWO 270 DEGREE
MODEL 12 X 44 KL, UPGRADED WITH
HEAT ZONES, 7) 8) MAGNETIC OVER-THE-
CYCLOPS STRAPPER, ALL ELEVATORS,
LINERS.
FRAME MOUNTED ROTARY CURLERS. CROWN
THE ANILOX METERING SYSTEM, WAGNER
HUMP ELEVATOR, 8) ONE LOT OF HONE
INTERCONNECTING CONVEYORS, LINE
MODEL 5CD-26 ROTARY COMPOUND LINER
ROTARY AIR OVEN WITH A PREHEAT ZONE
CHAIN CONVEYING, APPROXIMATELY 80
AND 3 HEAT ZONES. HAS BEEN UPGRADED
SETUP FOR SOLVENT BASE COMPOUND
FEET STAINLESS STEEL SIDE GUIDES.
WITH AN LTG WICKET WASHER, IS COMPLETE
FLEETWOOD MANUAL BALANCING STATION,
9) ANGELUS 50P CF DOUBLE SEAMERS SET
WITH TEMPERATURE CONTROLLERS AND
2216 E. Miner Avenue,
2 Each - MINSTER MODEL P245 CONVERSION
UP FOR 610 DIAMETER PAINT CAN RINGS
SHEET LOADER AND UNLOADER, ALTRISTA
AND BOTTOMS.
Stockton, CA 95205 USA
PRESS WITH INTEGRATED TAB DIE RATED
MICROSPERE MODEL MS200 SERIES ICO
T +1 (209) 4697384
80 TO 400 STROKES PER MINUTE. 2 Each -
ELECTROSTATIC SHEET WAXER, DEXTER
LITTELL TAB STOCK UNCOILER FLEETWOOD
SHEET STACKER, WAGNER INLINE BUNDLE
F
STYLE CAN LINE FOR ONE GALLON
CANS FACTORY FINISH IS 402X610X907 F +1 (209) 4694826
MANUAL BAGGING STATION, LINE INCLUDES
TURNER, ROLLER INFEED AND DISCHARGE
RATED FOR 90 CANS PER MINUTE TO
sales@canmaking.net
www.canmaking.net
www.canmaking.net
World’s Largest Supplier of Quality Used Can Making Equipment
Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60
Produced with Yudu - www.yudu.com