This page contains a Flash digital edition of a book.
HUGE 2 PLANT AEROSOL and LIQUIDATION STILL INSTALLED
PAINT CAN MAKING FACILITY and AVAILABLE FOR REMOVAL
C
ONTINENTAL CAN CO 628BNM DIE 211 DIAMETER AEROSOL BOTTOMS
ELEVATOR 6 FEET TALL, 4) COMPONENT FED CUTOUT IN DIE BED AREA. APPROXIMATELY 180 FEET LONG INCLUDING
NECKERS FULLY AUTOMATIC SIX STATION, B
LISS MODEL 1225A SINGLE OPERATION
SLITTER, 1ST OPERATION TABLE HAND 211 DIAMETER AEROSOL TOPS
2ND OP PRESS MODEL 123P1, 5) INCLINE END COOLING ZONES WITH MAXON BURNERS. OVEN
SEVERAL UNITS AVAILABLE WITH THE FEED, 40-1/2 INCHES BETWEEN BEARING
ELEVATOR, 6) COMPONENT FED CONTINENTAL
C
OMPLETE SCROLL SHEAR LINE, 6 FOOT
LONG ROLLER INFEED CONVEYOR, BORDEN
DISCHARGE INCLUDES A MAGNETIC SHEET
FOLLOWING CONFIGURATIONS 205 BODY BLOCKS WITH 9 SETS OF TOOLED KNIVES.
G
RACE MODELS 19 and 24W SINGLE
LANE LINERS, FITTED WITH MECHANICAL
CAN COMPANY EEP 3RD OP PRESS, SINGLE
232 SHEET FEEDER, OXYDRY SHEET WAXER,
STRIPPER, 4) DEXTER 9000LB SHEET STACKER
PRENECK TO 203/204 TOP AND BOTTOM 205
GUN, PNEUMATIC END STOP, SET UP FOR
WHEEL 270 DEGREE SEGMENT CURLER.
BORDEN SCROLL SHEAR, DEXTER SCROLL
WITH WAGNER INLINE BUNDLE TURNER
BODY, 201 DIA TOP 204 DIA BOTTOM. FINAL
C
ANCO DUPLEX SLITTER WITH DEXTER
SHEET FEEDER, 1ST OPERATION HAS 6 WATER BASE COMPOUNDS.
DIE NECKING OPERATION OF A 202 DIAMETER
SETS OF CARBIDE KNIVES, 2ND OPERATION
6
10 DIAMETER PLUG LINE; STRIP STACKER. (2 LINES AVAILABLE TOOLED
AND A 10 FOOT POWER ROLLER DISCHARGE
1) CONTINENTAL CAN COMPANY 9A-SS FOR 211 DIAMETER AEROSOL BOTTOMS)
CONVEYOR. (TWO LINES AVAILABLE)
CAN. 211 DIA BODY, 207.5 DIA TOPS, 210 DIA
TABLE 8 SETS OF CARBIDE KNIVES, DEXTER
SCROLL SHEAR, DIE BED CUT WITH SHEET
BOTTOMS. (3 UNITS AVAILABLE), 211 DIA
G
RACE MODEL HCE SINGLE LANE LINER
WITH ELECTRIC GUN, UNIT DISCHARGES
SHEET FEEDER MODEL 6TF, MAXIMUM SHEET
FEEDER, 2) CONTINENTAL CAN STRIP FED
BODY, 1ST OP PRE NECK FOR 210 DIA BOTTOM
DIRECTLY TO A SINGLE LANE PACKING STATION
C
OMPLETE SCROLL SHEAR LINE, 6 FOOT
LINE POWERED ROLLER CONVEYOR,
H
IGH SPEED SHEET COATING LINE
CONSISTING OF; 1) DEXTER SHEET FEEDER
SIZE 36X36.
PRESS, 1ST OP, 3) INCLINE END ELEVATOR, 4)
AND 207.5 DIA TOP, 202 DIA BODY, 201 DIA TOP
WITH A MAGNETIC WHEEL UPSTACKER, 3 FOOT
DEXTER SHEET FEEDER, OXYDRY SHEET
44X44, 2) WAGNER 15 INCH SHEET COATER
CONTINENTAL CAN COMPANY 18W COMPONENT
AND 200 DIA BOTTOMS (2 UNITS AVAILABLE).
A
NGELUS 41P AND 43P SEAMERS, SET LONG PACKING TRAY.
WAXER, CONTINENTAL CAN COMPANY 9B-
WITH DUAL SCRAPERS WET SHEET BLANK
UP FOR 211 DIAMETER AEROSOL DOME
FED PRESS, 2ND OPERATION.
SS SCROLL SHEAR, DEXTER SCROLL STRIP
FEED TABLE, 3) YOUNG BROTHERS WICKET
C
ONTINENTAL CAN CO 626SF-1 SPIN
BOTTOMS AND CONE TOPS.
FLANGER FULLY AUTOMATIC SIX STATION
M
OUNTAINGATE STYLE SINGLE LANE
END CURING OVENS 42 INCH LONG HEAT
E
AR SLITTER LINE – FOR THE 610 STACKER. (3 LINES AVAILABLE ONE EACH
OVEN NATURAL GAS FIRED FOUR HEATING
DIAMETER EARS; 1) CONTINENTAL FOR 202, 200 AND 207.5)
AND ONE COOLING ZONES 180’ UPGRADES
DUAL SIDED, SEVERAL UNITS AVAILABLE WITH
TUNNEL, MOUNTED POWER PANEL WITH RKC
DUPLEX SLITTER WITH SHEET FEEDER, MODEL
INCLUDE HONEYWELL DIGITAL CIRCLE CHART
THE FOLLOWING CONFIGURATIONS; 211 DIA
A
NGELUS MODEL 50P DF SEAMERS, SET
UP TO SEAM 610 DIAMETER PAINT CAN TEMPERATURE CONTROLLER. WITH VARIOUS
305-GS-1, FITTED WITH CARBIDE KNIVES, 1ST
BODY, 207.5 TOPS AND 210 BOTTOMS; 202 DIA
RINGS AND BOTTOMS, (2 UNITS AVAILABLE CONFIGURATIONS TO INCLUDE
L
ITTELL MODEL LM1E COIL CUTTING
RECORDER TEMPERATURE RECORDER, PLC
LINE MFG 1985 SERIAL NUMBER 87843-
OP TWO SETS, 2ND OP HAS SINGLE CHAIN ON
WITH GRAPHIC INTERFACE SCREEN, BELT
BODY, 201 TOPS AND 200 BOTTOMS (3 UNITS
ONE FOR EACH OPERATION) 211 DIA AEROSOL DOME BOTTOMS
85WITH DIGITAL CUT TO LENGTH AND 4 BOX
CENTER AND ELEVEN SETS WITH A 10 POCKET
DRIVEN SHEET STRIPPER, 4) DEXTER 9000LB
AVAILABLE); 205 DIA BODY, 202 TOPS AND 204
200 DIA AEROSOL CONE TOPS
CLASSIFIER INCLUDING THE FOLLOWING:
ADJUSTABLE STACKING TABLE.
SHEET STACKER 44X44, 5) LUTHI BUNDLE
BOTTOMS; 202 DIAMETER NECKED IN CAN. L
ANICO RAPID SINGLE HEAD MANUAL
SEAMER, FEATURES 4 ROLL SINGLE
112 DIA AEROSOL CONE TOPS
1) COMMON FRAME MOUNTED COIL UPENDER/
TURNER MODEL BT-10R AND 10 FOOT LONG
211 STANDARD BOTTOMS
B
ORDEN 48 POCKET 3-C-HP HIGH
HEAD SEAMING STATION WITH FOOD PEDAL
6
10 EAR PRESS FOR PAINT CANS. 1) 1ST COIL CAR/UNCOILER, UNIT CONFIGURED
POWERED ROLLER CONVEYOR.
OPERATION CONTINENTAL STRIP FED TO ALLOW STAGING OF TWO COILS AND
PRESSURE FULLY AUTOMATIC AEROSOL
OPERATED LIFTER, SET UP ON 202 DIAMETER.
PRESS, SINGLE LANE MAGNETIC ELEVATOR, 2) HAVE UNCOILER LOADED WITH ONE COIL
CAN AIR TESTER, SET UP FOR 205 DIAMETER
AMECO BART 2 AUTOMATIC BODY BLANKS P
AINT CAN LINE SET FOR 610X711/709:
1) CONTINENTAL CAN COMPANY MODEL
2ND PRESS – TINENT NO. 123-P, COMPONENT CAPACITY 25000LBS, 2) LIGHT BOX OPERATOR
H
IGH SPEED SHEET COATING
LINE CONSISTING OF;
NECKED CANS, UNIT FEATURES HEAVY DUTY
TRANSPORT SYSTEM, 361-ST3 DUPLEX SLITTER WITH SHEET
FED PRESS, DOUBLE DIE, 3) 3RD OPPRESS INSPECTION STATION, 3) LITTELL LEVELER
1) DEXTER SHEET FEEDER 6MTF 36X44 INCHES
TIMING SCREW TO STAR INFEED DUAL WHEEL
FEEDER, 2) BART II AUTOMATIC BODY BLANK
BLISS DOUBLE DIE, GRAVITY DISCHARGE, WITH INTEGRATED PRATT & WHITNEY ROLLING
2) WAGNER 15 INCH SPOT COATER DUAL
DISCHARGE, HYDE PARK MD20 UPGRADE, F
AEL HSW-P-EAR22-360 FULLY AUTOMATIC
WELDER, SET UP TO ACCEPT ROLL FORMED
TRANSFER, 3) HOPKINS EAR CLINCHER,
DUAL LANE INCLINE ELEVATOR. MICROMETER, 4) LITTELL SHEAR INCLUDES
SCRAPERS, ANILOX METERING SYSTEM, WET
ALLEN BRADLEY PLC CONTROL UPGRADE, BODY BLANKS WITH EARS ATTACHED, TOOLED
155 SPM CAPACITY, 4) FAEL WELDER MODEL
SHEET OVEN INFEED CONVEYOR TABLE, 3)
REBUILT AND UPGRADED IN 2005 VERY 610 DIAMETER. KATO BRUSHLESS FREQUENCY
HSP22-360EC WITH ANC WELD MON, KATO
GOOD CONDITION. CONVERTER, OVERHEAD MAGNETIC
FREQUENCY CONVERTER, LIQUID INSIDE
H
ELPER LINE FOR THE EAR PRESS
INTEGRATED SEMS UV PINHOLE DETECTOR
WAGNER 6 ZONE WICKET OVEN 180’ LONG 6
CONTINENTAL CAN MODEL 207PGF,
DIGITAL CUT TO LENGTH WITH THREE POST
HEATING AND COOLING ZONES, HONEYWELL
DOUBLE DIE STRIP FED PRESS, VIBRATORY
SHEAR, 5) LITTELL FOUR BOX CLASSIFIER
DIGITAL CIRCLE CHART CONTROLLERS WITH
B
ORDEN 36 POCKET HIGH PRESSURE
DISCHARGE CONVEYOR. SET UP FOR LIQUID
SPRAY, OVERHEAD MAGNETIC DISCHARGE,
SYSTEM THAT SEPARATES THE EARS INTO TWO
UNIT HAS BOTH A & B PRIME PLATE STACKING
FULLY AUTOMATIC AIR TESTER. UNIT
INSIDE SPRAY. (2 UNITS AVAILABLE)
SPRAY AND ACCEL. CONV, 5) FLYNN 9
METER CURING OVEN, SIX HEAT ZONES, 6)
LANES TO A COMPONENT FED BLISS PRESS.
BOXES AND TWO REJECT STACKING BOXES,
ALLEN BRADLEY SLICK 504 PLC AND AC
DESIGNED FOR 202 DIAMETER AEROSOL CANS,
ONE FOR PINHOLE AND ONE FOR OVER/UNDER
INVERTER DRIVES. OVEN DISCHARGE BELT
UNIT HAS 9 INCH STROKE, SPOOL VALVE NO
F
EDERAL 717FCM-2 EAR CLINCHER UNIT
MAGNETIC OVER-THE-HUMP ELEVATOR, 7)
IS AUTOMATICALLY FED BODY BLANKS
ONE LOT OF HONE CHAIN CONVEYING.
CAN NO AIR, SPOOL VALVE TEST AIR, HYDE
FROM BART SYSTEM TRANSPORTED DOWN,
4
04 DIA PLUG LINE: 1) 1ST OP PRESS
GAGE, 6) DIGITAL CUT TO LENGTH SYSTEM IS
DRIVEN SHEET STRIPPER, 4) WAGNER 6MBD
CAMERON 313 STRIP FED PRESS, 2)
8) ANGELUS 50P CF DOUBLE SEAMERS SET
ORMEC, CONTROLS ARE PLC ALSO INCLUDED
SHEET STACKER 36X44, 5) LUTHI INLINE
PARK MODEL MD2, MODEL MC128 AND DUAL
HAS EARS CLINCHED ONTO BODY BLANKS.
MAGNETIC END ELEVATOR, 3) 2ND OP
UP FOR 610 DIAMETER PAINT CAN RINGS AND
IS MOTORIZED DIE LIFT TABLE AND PNEUMATIC
BUNDLE TURNER 10 FOOT LONG POWER
PS10’S.
COMPONENT FED PRESS CONTINENTAL 217,
GAUGING TABLE, ROCKWELL HARDNESS
ROLLER CONVEYOR
4) 3 FOOT LONG MAGNETIC BELT INCLINE
TESTER LINE IS VERY GOOD CONDITION.
B
ORDEN 36 POCKET HIGH PRESSURE
C
ROWN MODEL 301 BEADER, TOOLED BOTTOMS.
610 DIA BY 708 HIGH. UNIT FEATURES 8
ELEVATOR, BAGGING STATION WITH MAGNETIC
FULLY AUTOMATIC AIR TESTER. UNIT
STATION BEADING TURRET WITH 2 UP, 2 DOWN
F
STYLE CAN LINE FOR ONE GALLON
CANS 402X610X907, 90 CPM INCLUDES;
WHEEL UPSTACKER.
DESIGNED FOR 211 DIAMETER AEROSOL CANS.
BEAD PATTERNS.
1) CONTINENTAL CAN COMPANY MODEL 361-
S
HEET WAXING LINES CONSISTING OF;
V
ARIOUS MISCELLANEOUS EQUIPMENT
ALSO AVAILABLE TO INCLUDE
1) DEXTER SHEET FEEDER WITH 10 VIDEO JET EXCEL 170i INK JET PRINTERS.
UNIT FEATURES TIMING SCREW TO STAR
INFEED, SPOOL VALVE NO CAN NO AIR, SPOOL
4
04 RING LINE: 1) 1ST OP CAMERON 248
FOOT LONG ROLLER CONVEYOR, 2) OXYDRY (2 UNITS AVAILABLE) COATING ROLL
STRIP FED PRESS, MAGNETIC INCLINE
ELECTROSTATIC SHEET WAXER, 3) DEXTER GRINDING SYSTEM SOUTHBEND LATHE
VALVE TEST AIR, DUAL WHEEL DISCHARGE,
B
LH MODEL 302 DIE FLANGER, TOOLED ST2 DUPLEX SLITTER AND FEEDER. 2) FAEL
610 DIAMETER BY 708 HIGH. UNIT WELDER MODEL MST12-360, 3) SABATIER
BELT ELEVATOR, 2) BLISS 2ND OP COMPONENT
MODEL PE SHEET STACKER SERIAL NUMBER SUITABLE FOR 12 OR 15 INCH COATING ROLLS,
HYDE PARK MD20 UPGRADE, ALLEN BRADLEY
FEATURES 4 STATION DIE FLANGING TURRET EXPANDER, 4) FLYNN 9 METER CURING
FED PRESS, 3) MAGNETIC END ELEVATOR, 4)
20931, MAXIMUM SHEET SIZE 36X44 INCHES. GRINDER ATTACHMENT AND A VACUUM DUST
PLC CONTROL UPGRADE.
TO GRAVITY DISCHARGE. OVEN, SIX HEAT ZONES. 5) ACCEL CONV,
ROCKFORD NO. 3S 3RD OP COMPONENT FED
(2 LINES AVAILABLE) COLLECTOR SYSTEM. WAGNER IN LINE
END PRESS, , 5) GRACE 2U SINGLE LANE LINER
B
ORDEN 24 POCKET TESTER, SET UP
WITH ELECTRONIC GUN, 6) SINGLE LANE
FOR 610 DIAMETER PAINT CANS.
F
LYNN MODEL AF9 CURING OVEN, 9
6)MAGNETIC OVER-THE-HUMP ELEVATOR,
METERS, SET UP WITH DUAL BANDS AT 4
7) BLISS 1420 DIE FLANGER, 8)ONE LOT OF
BAGGING STATION WITH A MAGNETIC WHEEL
H
IGH SPEED SHEET COATING LINE
BUNDLE TURNER, MAXIMUM BUNDLE SIZE 44
CONSISTING OF; 1) DEXTER 9000LB
INCHES WIDE BY 28 INCHES TALL, LANTECH
UNIT FEATURES ELECTRIC CAN STOP, 8 INCH
INCHES APART ON CENTER.
HONE CHAIN CONVEYING, 9) ANGELUS MODEL
94P-6 DOUBLE SEAMERS FOR BOTTOMS AND
UPSTACKER.
SHEET FEEDER, 2) WAGNER 15 INCH SPOT
SINGLE HIGH OFF LINE WRAPPER, SET
STROKE, NO CAN NO AIR SPOOL VALVE, SPOOL
COATER WITH ANILOX METERING SYSTEM,
UP FOR 52 INCH WIDE STRETCH WRAP
VALVE TEST AIR, DUAL WHEEL DISCHARGE,
B
LISS 1103 SCROLL SHEAR TOOLED 610
TOPS, 11) THREAD APPLICATOR FOR TOPS,
DIAMETER, DIE BED CUT OUT, DEXTER
12) SOLDER SYSTEM FOR SCREW TOP, 13)
HYDE PARK MODEL MD2 MEMORY DISPLAY
SHEET FEEDER MODEL TF MAXIMUM SHEET
MAGNETIC ELEVATOR, 14) BORDEN MODEL
4
04 DIAMETER BOTTOM ENDS; 1)
SINGLE SCRAPER SYSTEM, WET SHEET OVEN
FILM,WRAPPING FILM, MOTORIZE TURNTABLE.
CONTINENTAL CAN COMPANY 207-PCF-1
INFEED CONVEYOR. 3) WAGNER SIX ZONE
WAGNER 15 INCH COATER, SUITABLE ONLY
MODEL MC128 SINGLE PS10, MOUNTED
SIZE 38X38, 4 FOOT LONG POWERED ROLLER
500 24 POCKET AIR TESTER, 15) FUSION
COMPONENT FED END PRESS WITH SINGLE
WICKET OVEN WITH FOUR HEATING AND ONE
FOR REBUILDING, MANY PARTS MISSING.
OPERATOR CONTROLS AND POWER PANEL.
CONVEYOR. (2 UNITS AVAILABLE)
INC. HANDLE APPLICATOR CAN, 16) VIDEO
CURLER, 2) MAGNETIC INCLINE END ELEVATOR,
COOLING ZONES EQUIPPED WITH ECLIPSE LOW
NIPPON AIR TEMPRO AIR COOLED WATER
3) GRACE 19W8A SINGLE LANE LINER WITH
NOX BURNERS, UPGRADES INCLUDE DIGITAL
CHILLER, MODEL AC3-7.5Q, MAGNETIC SPRAY
C
ONTINENTAL ST-4 SLITTER, 1ST OP
HAS ELECTRONIC GUN, SINGLE LANE PACKING
HAS 6 SETS OF CARBIDE KNIVES, 2ND OP
B
LISS 1831 STRIP FED PRESS, SINGLE
JET MODEL EXCEL, 17) SOLDER SYSTEM FOR
DIE, TOOLED FOR 610 DIAMETER, (2 UNITS
HANDLE ATTACHMENT.
HONEYWELL CIRCLE CHART RECORDERS,
CONVEYOR, MAGNETIC ACCELERATOR
STATION WITH MAGNETIC DUAL UPSTACKER
HAS 5 SETS OF CARBIDE KNIVES, BORDEN
AVAILABLE)
ALLEN BRADLEY PLC CONTROLS AND A BELT
CONVEYOR, MAGNETIC OVER THE HUMP
AND BAGGING TRAY.
SHEET FEEDER, MAXIMUM SHEET SIZE 37X44
DRIVEN SHEET STRIPER / CONVEYOR. 4)
ELEVATORS, LOT OF APPROXIMATELY 300
INCHES, WITH 6 FOOT LONG POWERED ROLLER
B
LISS C 35 TON COMPONENT FED
F
STYLE ONE GALLON BOTTOMS AND
TOPS
END PRESS, SLIDE ADJUSTMENT 2-1/2
CALLAHAN MODEL GSE STRIP FED PRESSES,
CONVEYOR.
B
LISS 1103 SCROLL SHEAR WITH DEXTER STRIP STACKER 6000LB CAPACITY.
FEET OF MILD STEEL CABLE TRACK, ,
DEXTER SHEET FEEDER. SET UP FOR SIDE 5) LUTHI MODEL 10-R BUNDLE TURNER, 10
INCLINED MAGNETIC ELEVATOR, MANUAL
INCHES, STROKE 5 INCHES, TOOLED FOR
DUAL FEED SCREW UPSTACKER, END FED TO
TRIMMING, PRESS HAS SLOT IN CENTER OF FOOT LONG POWERED FULL PALLET TIN PLATE
BAGGING STATION FOR 610 DIAMETER, (3
B
LISS 5325 DUPLEX SLITTER, 1ST OP HAS
610 DIAMETER, SINGLE GREGORY KICKER,
CAMERON MODEL 176 SINGLE LANE CURLER
DIE BED, LAST RAN 610 DIAMETER ENDS, CUT HEAVY DUTY ROLLER CONVEYOR.
UNITS AVAILABLE) SINGLE LANE PACKING
3 SETS OF CARBIDE KNIVES, 2ND OP HAS
GRAVITY DISCHARGE (3 UNITS AVAILABLE).
IN CENTER OF DIE BED
STATION, AUTOMATIC MAGNETIC BODY
5 SETS OF CARBIDE KNIVES. DEXTER FEEDER
MODEL 6MTF, MAXIMUM SHEET SIZE 44X44, 4
C
AMERON 314 STRIP FED PRESSES (5
F
STYLE HANDLES FOR THE ONE GALLON
CANS. 1) SINGLE WHEEL UNCOILER,
UNITS AVAILABLE TOOLED FOR 200 AND
PINCH ROLL / COIL STRAIGHTENER SYSTEM
FOOT LONG POWERED ROLLER CONVEYOR.
U
NITED CAN SCROLL SHEAR, SINGLE S
HEET COATING LINE CONSISTING OF THE
BLANK FEEDER, TRANSPORT BODY BLANKS
FOLLOWING: 1)DEXTER SHEET FEEDER, 2)
INDIVIDUALLY FROM SLITTER TO WELDER
CHAIN ON CENTER TO DUAL RECIPROCATING WAGNER 15X44 INCH COATER WITH DOUBLE
202 AEROSOL BOTTOMS, 211 AEROSOL TOPS).
WITH 8 SETS OF LEVELLING ROLLS, 2) BLISS
FEED HOPPER. (2 UNITS AVAILABLE)
FEED BARS WITH FEED FINGERS, UNTOOLED, SCRAPERS, 3) WAGNER SIX ZONE OVEN
C
ONTINENTAL MODEL 361ST5, 1ST
MODEL 20C SINGLE DIE PRESS HANDLES
OP HAS 49 INCHES BETWEEN BEARING
B
LISS MODEL 102S TRANSFER PRESS,
FEATURES ROTARY DISK INFEED TO
ARE PREFORMED AND CUT, 3) HANDLES ARE
BLOCKS, FITTED WITH HYDRAULIC HUBS
RECIPROCATING FEED BAR, 5 OPERATION
GRAVITY FED TO A MAGNETIC BELT ELEVATOR,
AND CARBIDE CUTTERS, 6 SETS ON 1ST OP
STATIONS, SET UP FOR 211 DIAMETER
4) LAZY SUSAN STYLE UNCOILER. 2216 E. Miner Avenue,
AND 8 SETS ON 2ND OP, 40 INCHES BETWEEN
AEROSOL TOPS, DISCHARGE THROUGH 4 INCH
6
10 DIAMETER RING LINE ; 1)
Stockton, CA 95205 USA
BEARING BLOCKS, INCLUDES DEXTER SHEET
WIDE FLAT BELT DISCHARGE.
CONTINENTAL CAN MODEL 9BSS SCROLL
FEEDER MAXIMUM SHEET SIZE 36X44AND SHEAR, DIE BED CUT OUT WITH SHEET T +1 (209) 4697384
BODY BLANK STACKING TABLE.
C
ONTINENTAL CAN CO. 5CD LINERS,
WITH THE FOLLOWING CONFIGURATIONS
FEEDER AND POWERED ROLLER CONVEYOR,
2) CONTINENTAL CAN MODEL 175-AP STRIP
F +1 (209) 4694826
200 DIAMETER AEROSOL DOME BOTTOMS.
FED PRESS, 1ST OP PRESS, 3) INCLINE END
sales@canmaking.net
www.canmaking.net
www.canmaking.net
World’s Largest Supplier of Quality Used Can Making Equipment
Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60
Produced with Yudu - www.yudu.com