automatic
point of
data capture
sale
New Intermec IP30
handheld RFID reader for
PRODUCT NEWS
mobile computers
advanced data collection IP30 is combined with the Intermec
methods, GPS location CK61ex, it is a handheld RFID system
association, and communication via with an integrated near/far barcode
multiple radios, the IP30 delivers imager, enabling users to scan both
mobile RFID read-write capability both 1D and 2D barcodes from a variety of
ntermec has within buildings and outside of them. distances up to 50 feet, conveniently
I
introduced the IP30 The IP30 can be purchased with or complementing RFID data collection.
add-on RFID reader, added to an existing installed base
a cost-effective, of CN3 Series or CK61 mobile “Increasingly, RFID and barcode
compact, globally- computers, allowing customers to labelling are moving away from simple
certified solution add RFID capability or increase the ‘either-or’ co-existence towards
for adding mobile scale of existing RFID installations complementary solutions that marry
RFID read/write when they are ready. identification at the item, case, and
capability to the latest generation of pallet levels,” said Chris Kelley,
Intermec mobile computers – including director of RFID and data capture
the CN3, CN3e, CK61, and CK61ex. Integrated GPS and WWAN marketing at Intermec. “The IP30 and
The Intermec IP30 provides a versatile The IP30 is a handheld RFID system CK61ex deliver the needed flexibility to
handheld RFID system and the snap- with integrated GPS and WWAN when not only read RFID but also 1D and 2D
on design gives users a high level of combined with the Intermec CN3 bar codes from any angle, near and
flexibility. Through a combination of mobile computer. In addition, when the far, within the same application.” a71
Blackroc launches
new variants to successful
Pro60 mobile printer
ollowing on from the success recharging of the printer battery from
F
of the Pro60B Bluetooth the Workabout Pro itself when docked
mobile receipt printer, in a standard cradle, and thus means
Blackroc has developed two no separate chargers and cables are
new printer models for required. For wireless applications
specific applications. The Pro60S is where Bluetooth is not available, the
hardwired directly to the Workabout Pro60IR uses infrared to send and
Pro via a flexi-cable that plugs into the receive data via its IR port with any
Tony Jephcott: Catering to the demands
of Workabout Pro resellers.
internal scanner port. This allows direct IR-enabled host. >>
16 IT RESELLER – JUNE 2008
www.itrportal.com
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60