This page contains a Flash digital edition of a book.
DIESEL TRANSFER
PANTHER
The Panthers are self-priming rotary vane pumps with cast iron pump bodies
for diesel transfer only. They are fi tted with internal, 100 micron fi lters, which are
easily accessible for cleaning. In addition, they have internal by-pass valves, which
protect the pump (for up to 2 minutes) from pressure caused by a closed nozzle.
They have steel shafts, which are fi tted with mechanical seals and have TEFV
■ 61 – 81 litres ✔ Hire Fleets
IP55 motors fi tted with on/off switches and power leads are supplied. Maximum
per minute ✔ Transport
liquid temperature is 50ºC. It should not be run dry, so an initial priming of diesel
■ red diesel ✔ Agriculture is necessary. Maximum suction lift, with a foot valve, is 3 metres, however without
one, 2 metres, or less, is recommended. As an optional extra they can be supplied
■ white diesel
with pumping kits, that comprises a manual nozzle*, hose fi ttings, strainer and 5
ACE PUMPS
■ bio-diesel
metres of rubber/PVC hose that can be cut to the required suction and discharge
■ 110 volts
length. They should not be run dry, so they should always have an initial priming of
■ 230 volts
diesel. Suitable for biodiesel. They MUST NOT pump water, petrol, high viscosity
liquids, chemicals, solvents or products with a low fl ash point. They are supplied
SURF
free-standing, so for ease of handling and added protection, a full frame is a worthy
investment as an optional extra.
* Some cars will not accept this size of nozzle (please check with our sales
department for guidance)
Pumping kit
Panther
Panther in frame
ACCESSORIES
Diesel hose page 84
Fuel meters page 83
Auto shut off nozzles page 84
model inlet outlet kW volt duty fl ow head w x l x h weight
(BSPF/mm) (BSPF/mm) (l/min) (mtrs) (mm) (kgs)
Panther 56 pump 1" 1" 0.37 110 continuous 61 17 150x225x190 7.4
Panther 56 pump c/w kit 25 25 0.37 110 continuous 61 17 150x225x190 7.4
Panther 56 pump 1" 1" 0.37 230 continuous 61 17 150x225x190 7.4
Panther 56 pump c/w kit 25 25 0.37 230 continuous 61 17 150x225x190 7.4
Panther 72 pump 1" 1" 0.50 230 continuous 81 19 186x225x190 7.9
Panther 72 pump c/w kit 25 25 0.50 230 continuous 81 19 186x225x190 7.9
Panther 72 pump 1" 1" 0.50 400 continuous 81 19 186x225x190 7.9
Panther 72 pump c/w kit 25 25 0.50 400 continuous 81 19 186x225x190 7.9
Optional extra: full protection frame (small)…to fi t models 56 & 72. 250x310x270 3.2
76 FAX: 01622 355019
Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64  |  Page 65  |  Page 66  |  Page 67  |  Page 68  |  Page 69  |  Page 70  |  Page 71  |  Page 72  |  Page 73  |  Page 74  |  Page 75  |  Page 76  |  Page 77  |  Page 78  |  Page 79  |  Page 80  |  Page 81  |  Page 82  |  Page 83  |  Page 84  |  Page 85  |  Page 86  |  Page 87  |  Page 88  |  Page 89  |  Page 90  |  Page 91  |  Page 92  |  Page 93  |  Page 94  |  Page 95  |  Page 96  |  Page 97  |  Page 98  |  Page 99  |  Page 100  |  Page 101  |  Page 102  |  Page 103  |  Page 104  |  Page 105  |  Page 106  |  Page 107  |  Page 108  |  Page 109  |  Page 110  |  Page 111  |  Page 112  |  Page 113  |  Page 114  |  Page 115  |  Page 116
Produced with Yudu - www.yudu.com