SURFACE
e-BOOST
The e-Boost is a self-priming, multi-stage, pressure pump with integral electronics for
the ultimate in automatic pressure boosting in domestic and industrial applications.
This unique product is programmed to start and stop automatically when a valve or
tap is opened or closed. Another programme stops the pump automatically, protecting
it from severe damage caused by a malfunction on the suction side e.g. dry running,
■ 1” (25mm) ✔ Boosting
sucking air, a blockage etc., or on the delivery side e.g. a dripping tap. This programme
■ clean water ✔ Irrigation
will also attempt to restart the pump three times over 20 hours to check if it has been
■ self priming ✔ Wash down resolved naturally or allow manual reset once it has been resolved by the user. The reset
button is extremely accessible and is located conveniently on the top of the pump.
■ automatic ✔ Potable Water
Alongside this button are a series of three coloured LED lights that, when illuminated,
■ pressure switch
indicate that mains power is connected (green), the pump is running (yellow) and when
■ dry run protection
TIC BOOSTER
the pump has stopped due to a malfunction (red). To ensure correct operation the
■ leak checker
column of water between the pump and the highest outlet must not exceed 15 metres
■ 230 volts (1.5bar). It’s attractive appearance, compact design, ease of use and it’s quiet operation
(67dB) make it ideal for use inside the home, however industrial users will like it’s many
features too. Construction of the impellers, pump case, motor cover, handle, stand and
control box are a composite of industrial plastics while the water cooled, motor body,
is 304 stainless steel. The stainless steel shaft is fi tted with a carbon ceramic and NBR
mechanical seal and the motor incorporates overload protection. It has an integral non
AUTOMA
return valve and reservoir and is supplied with 1 metre of power cable. It is designed for
pumping clean water only, at a maximum temperature of 35ºC.
ACCESSORIES
Pressure hoses page 92
Quick couplings page 94
e-Boost Elbows page 100
Speed - 2900 rpm
40
30
m
e
B
d
o
a
o
s
e
20 t
H
10
0
0 25 50 75 100
Flow l/min
model inlet outlet kW volt fl ow head w x l x h weight
(BSPM) (BSPM) (l/min) (mtrs) (mm) (kgs)
e-Boost 800 1" 1" 0.80 230 85 35 280x460x420 11
e-Boost 800 1" 1" 0.80 110 85 35 280x460x420 11
Optional extra: 4 metre suction kit c/w foot valve and strainer
Optional extra: 7 metre suction kit c/w foot valve and strainer
64 FAX: 01622 355019
Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64  |  Page 65  |  Page 66  |  Page 67  |  Page 68  |  Page 69  |  Page 70  |  Page 71  |  Page 72  |  Page 73  |  Page 74  |  Page 75  |  Page 76  |  Page 77  |  Page 78  |  Page 79  |  Page 80  |  Page 81  |  Page 82  |  Page 83  |  Page 84  |  Page 85  |  Page 86  |  Page 87  |  Page 88  |  Page 89  |  Page 90  |  Page 91  |  Page 92  |  Page 93  |  Page 94  |  Page 95  |  Page 96  |  Page 97  |  Page 98  |  Page 99  |  Page 100  |  Page 101  |  Page 102  |  Page 103  |  Page 104  |  Page 105  |  Page 106  |  Page 107  |  Page 108  |  Page 109  |  Page 110  |  Page 111  |  Page 112  |  Page 113  |  Page 114  |  Page 115  |  Page 116