Roofing, Cladding & Insulation
SPECIFICATION
PRODUCT UPDATE
Sandtoft Roof Tiles Ltd
Dales Aluminium Building Products Belton Road, Sandtoft, Doncaster, South Yorkshire, DN8 5SY
Tel: 0115 930 1521 Fax: 0115 930 7625 Tel: 0870 145 2020 Fax: 0870 145 2019
Email: sales@dales-eaves.co.uk Website: www.dales-eaves.co.uk Email: info@sandtoft.co.uk Website: www.sandtoft.com
Dales Improve Sigma Looks Aren't Everything
The success of Dales ‘Sigma’ eaves feature profile has led A handmade clay plain tile should not only be a thing of
to a development in tooling that extends the horizontal fins beauty, it should be manufactured to the highest possible
that provide the familiar ‘I’ beam appearance in order to meet standards at minimum cost to the environment. The Goxhill
a growing demand for deeper section height and thus a need plain tile has been manufactured in the UK for generations to
for comparative continuity of scale. Dales panel and Kwikfix withstand the aggressive nature of our climate, which is why
soffits are adapted to connect to Sigma with secret fixings we are already successfully testing the tile to four times the
where required and when fitted on a Dales diaphragm support current European Standard for frost resistance, in readiness
provide an independent secondary assembly designed to for the performance recommendations set out in the new test
produce tolerances that overcome variables caused by method EN 539-2:2006. It's also why we guarantee it will
steelwork, roof loadings and masonry alignment. perform for at least 60 years.
Click here to request literature Click here to request literature
Interlink Fabrications
International Petroleum Products Ltd
Sherburn, Malton, YO17 8PQ
Bradwell Hall, Bradwell on Sea, Essex, CM0 7HX
Tel: 01944 712000
Tel: 01621 776178 Fax: 01621 776688
Email: rainscreens@interlink-fabs.co.uk
Email: sales@intpetro.com www.intpetro.com
Website: www.interlink-fabrications.co.uk
Effective All Year Round
Suiting Both Old & New Buildings
Alumaflex Insulation is a sophisticated thermo-reflective radiant
Interlink Fabrications rear-ventilated cladding systems provide
barrier. It will stop as much as 97% radiant heat transfer and is
an energy efficient and cost effective solution for both new
therefore very effective in heat retention in winter as well as
and old buildings. They are suitable for use on steel, concrete
heat reflection in summer. The product is lightweight, hypo
and timber-framed structures and offer guaranteed
allergenic and easy to install. The flexible properties of
performance, protecting against damp, heat, noise and fire to
Alumaflex make it suitable for roof and wall applications,
the required standards. Sections and profiles are
Alumaflex can also be used in loft and barn conversions.
manufactured from a range of materials including aluminium
Continuing analysis by professional bodies acknowledge that
composite, solid aluminium, zinc, copper, coated and
these types of products give an insulation value comparable to
stainless steel. These materials provide a number of benefits
200mm mineral fibre and commonly an equivalent R value of 5.
including a high level of flatness, durability, corrosion
Where there is a particular requirement for U - Value
resistance, flexibility and low maintenance costs.
calculations advice please contact our technical department.
Click here to request literature Click here to request literature
15
Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40