The Ceramic Plate &
Anchoring System
CERAMIC PLATE
Our wealth of experience in the field of ceramics
generated the expertise needed for the
manufacturing of extruded porcelain plates for
exterior façade cladding. We have developed a
modern day process to create products of high
impact resistance and strength combined with
lower porosity.
Tempio is an extruded through bodied porcelain,
fired at 1200˚C to create a consistent quality
plate of optimum accuracy in thickness, profile
and flatness. All our plates are glazed in order to
protect the façade from airborne dirt or
chemicals.
ANCHORING SYSTEM
The fastening systems designed for our rainscreens consist
THICKNESS: 24mm
of a stainless steel clip mechanically secured to a vertical
WEIGHT: 40 kgs./m sq
aluminium profile. The clips and support system are invisible
to create a façade that is symmetrical and uniform in
appearance. The support systems are designed to withstand
stresses and loads imposed by wind, structural deflection
and seismic movements.
The systems for anchoring the rainscreens support profiles
are flexible for use with a variety of backing walls and
will be tested to meet the criteria or codes of building
applicable.
ASTM:
Profile mechanic resistance
Aluminium characteristics 60/60
Flexion resistance
The stainless steel clips fulfil the AISI 304 Norm
4
Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16